|
 |
|
|
|
Hawk Performance Bed In / Burnishing Procedure
- After installing new brake pads, make 6 to 10 stops from approximately 30-35 mph applying moderate pressure.
- Make an additional 2 to 3 hard stops from approximately 40 to 45 mph.
- DO NOT DRAG BRAKES!
- Allow 15 minutes for brake system to cool down.
- After step 4 your new pads are ready for use.
|
|
|
| ©2008 - 2010 Hawk Pads Direct - All Rights Reserved. HawkPadsDirect.com is independently owned and operated by Hawk Pads Direct, an authorized independent reseller of Hawk Performance. This site is not owned or operated by Hawk Performance. |
|
|
|
