{"title":"Hawk Performance Brakes for 1967 Ford Mustang - w\/Front Disc Brakes","description":null,"products":[{"product_id":"motul-rbf600-brake-fluid-500ml","title":"Motul RBF600 Brake Fluid - 500mL","description":"\u003cdiv\u003e\n\u003ch2\u003eMotul RBF600 Brake Fluid\u003c\/h2\u003e\n\u003cp\u003eExtreme high performance polyglycol brake fluid. Far exceeds the standards of DOT 4. Each bottle is filled with Nitrogen, increasing shelf life and eliminating contamination while factory sealed. Extremely high dry boiling point 594F(312C) helps prevent vapor lock and brake fade during hard use, with excellent recovery time. Wet boiling point 399F(204C).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eType of Use\u003c\/h2\u003e\n\u003cp\u003eAll types of hydraulic actuated brake and clutch systems requiring a non-silicone synthetic fluid. Specially designed to resist to high temperature of racing actuated brake (steel or carbon) and clutch systems. Exceeds DOT 5.1 and DOT 3 standards also, except for viscosity at -40degC (-40degF).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003ePerformance\u003c\/h2\u003e\n\u003cp\u003eStandards: FMVSS 116 DOT 4 \/ SAE J 1703 \/ ISO 4925\u003c\/p\u003e\n\u003ch3\u003eExtreme thermal resistance and stability\u003c\/h3\u003e\n\u003cp\u003eThe very high boiling point (312degC \/ 594degF), superior to conventional DOT 5.1 non silicone base \/ DOT 5 silicone base fluids (260degC \/ 500degF mini) and DOT 4 (230degC \/ 446degF mini) enables an effective brake even under extreme conditions.\u003c\/p\u003e\n\u003ch3\u003eEfficient when rainy\u003c\/h3\u003e\n\u003cp\u003eThe very high wet boiling point (204degC \/ 399degF) superior to conventional DOT 5.1 non-silicone base fluid (180degC \/ 356degF mini) and DOT 4 (155degC \/ 311degF mini) enables to keep an efficient brake system when rainy. Indeed, DOT 3, DOT 4 and DOT 5.1 brake fluids have the property to absorb humidity in the air, which reduces their boiling points and increases the risk to get to vapor lock phenomena. The wet boiling point is measured by humidifying the product with about 3.5 percent of water.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eRecommendations\u003c\/h2\u003e\n\u003cp\u003eAvoid mixing with polyglycols based brake fluid with lower performances. Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM). Store brake fluid in its original container, tightly closed to prevent absorption of moisture. Aggressive chemical product if contact with hands, paint or varnish. If skin contact, rinse thoroughly with water.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"prop65\"\u003e\n\u003ch3\u003e\n\u003cimg alt=\"Warning Prop 65\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/prop65_10pt.png?v=1611080686\"\u003e WARNING\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Motul","offers":[{"title":"Default Title","offer_id":40827480309952,"sku":"MOTRBF600","price":19.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/products\/Motul_RBF600_600x600_7dd498cc-8405-4f9f-99fd-bbd239596463.jpg?v=1632161927"},{"product_id":"motul-rbf660-brake-fluid-500ml","title":"Motul RBF660 Brake Fluid - 500mL","description":"\u003cdiv\u003e\n\u003ch2\u003eMotul RBF660 Brake Fluid\u003c\/h2\u003e\n\u003cp\u003eVery high dry boiling point of 622F (328C) and a wet boiling point of 399F (204C). For all types of hydraulic brake and clutch actuators requiring non-silicone synthetic fluid. Specially designed to resist extreme temperature generated by racing brakes (carbon and ceramic) only allowing a minimal air entrance for brake cooling.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eType of Use\u003c\/h2\u003e\n\u003cp\u003eAll types of hydraulic brake and clutch actuators requiring non-silicone synthetic fluid. Specially designed to resist to extreme temperature generated by racing carbon and ceramic brakes allowing minimizing air entrance for brake cooling. Can be also used with conventional steel discs and clutch systems actuators. Widely exceeds DOT 3, DOT 4 and DOT 5.1 standards (except for DOT 5.1 viscosity at - 40C).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003ePerformance\u003c\/h2\u003e\n\u003cp\u003eStandards: FMVSS 116 DOT 4 \/ SAE J1703\u003c\/p\u003e\n\u003ch3\u003eExtreme thermal resistance and stability\u003c\/h3\u003e\n\u003cp\u003eVery high boiling point (328C \/ 622F), superior to conventional DOT 5.1 fluids (260C \/ 500F mini) and DOT 4 (230C \/ 446F mini) Enables effective brake even in extreme conditions. Better aerodynamic performance by reducing air entrance for brake cooling on cars.\u003c\/p\u003e\n\u003ch3\u003eEfficient when rainy\u003c\/h3\u003e\n\u003cp\u003eVery high wet boiling point (204C \/ 399F) superior to conventional DOT 5.1 non-silicone base fluid (180C \/ 356F mini) and DOT 4 (155C \/ 311F mini) enables to keep efficient braking in wet conditions. Brake fluids tend to absorb humidity from the air, which reduce boiling point and increase the risk to get to vapor lock phenomena. The wet boiling point is measured by humidifying the product with about 3.5 Percent of water.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eRecommendations\u003c\/h2\u003e\n\u003cp\u003eAvoid mixing with polyglycols based brake fluid with lower performances. Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM). Store brake fluid in its original container, tightly closed to prevent absorption of moisture. Aggressive chemical product if contact with hands, paint or varnish. If skin contact, rinse thoroughly with water.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"prop65\"\u003e\n\u003ch3\u003e\n\u003cimg alt=\"Warning Prop 65\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/prop65_10pt.png?v=1611080686\"\u003e WARNING\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Motul","offers":[{"title":"Default Title","offer_id":40827594047680,"sku":"MOTRBF660","price":29.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/products\/Motul_RBF660_Brake_Fluid_600x600_c3539083-78b6-48f3-9688-3fa02072ca40.jpg?v=1632162956"},{"product_id":"motul-dot5-1-brake-fluid-500ml","title":"Motul DOT5.1 Brake Fluid - 500mL","description":"\u003cdiv\u003e\n\u003ch2\u003eMotul MOT5.1 Brake Fluid\u003c\/h2\u003e\n\u003cp\u003e100% synthetic brake fluid on polyglycol basis for all types of hydraulic actuated brake and clutch systems in accordance with DOT 5.1, DOT 4 and DOT 3 manufacturers’ recommendations. Specially designed for anti-locking brake system (ABS). Dry boiling point of 516F (272C)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eType of Use\u003c\/h2\u003e\n\u003cp\u003eAll types of hydraulic actuated brake and clutch systems in accordance with DOT 5.1, DOT 4 and DOT 3 manufacturers recommendations. Fluidity specially designed for anti-locking brake systems (ABS).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003ePerformance\u003c\/h2\u003e\n\u003cp\u003eStandards: FMVSS 116 DOT 5.1 NON SILICONE BASE\/DOT 4\/DOT 3\/SAE J 1703\/ ISO 4925 (5.1, 4, 3)\u003c\/p\u003e\n\u003ch3\u003eLong Life Fluid\u003c\/h3\u003e\n\u003cp\u003eThe high wet boiling point (187C \/ 369F), superior to DOT 4 (155C \/ 311F mini) and DOT 3 (140C \/284F mini) conventional fluids enables to use this product longer. Indeed, DOT 3 \/ DOT 4 and DOT 5.1 brake fluids have the property to absorb humidity contained in the air, which reduces their boiling points and consequently security. The wet boiling point is representative of the fluid after one year of use.\u003c\/p\u003e\n\u003ch3\u003eSpecially designed for anti-locking brake systems (ABS)\u003c\/h3\u003e\n\u003cp\u003eThe viscosity (820 centipoises at -40C \/ -40F) lower than DOT 4 (up to 1800 cp) and DOT 3 (up to 1500 cp) brake fluids allows an easier fluid circulation in micro-valves of anti-locking systems. Perfectly neutral with seals used in braking systems. Anti-corrosion.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eRecommendations\u003c\/h2\u003e\n\u003cp\u003eMixable with DOT 3, DOT 4 and DOT 5.1 NON SILICONE BASE products. Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM). Store brake fluid in its original container, tightly closed to avoid absorption of moisture. Aggressive chemical product if contact with hands, paint or varnish. If skin contact, rinse thoroughly with water. Drain Interval: 12 to 24 month as per manufacturers recommendations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"prop65\"\u003e\n\u003ch3\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/prop65_10pt.png?v=1611080686\" alt=\"Warning Prop 65\"\u003e WARNING\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Motul","offers":[{"title":"Default Title","offer_id":40827626586304,"sku":"MOTDOT5.1","price":14.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/products\/Motul_DOT51_Brake_Fluid_600x600_539051f3-5945-443e-8eef-3b8fc908895e.jpg?v=1632163515"},{"product_id":"hawk-rhp520-brake-fluid-500ml","title":"Hawk HP520 Brake Fluid - 500mL","description":"\u003cdiv\u003e\n\u003ch2\u003eHawk HP520 Brake Fluid\u003c\/h2\u003e\n\u003cp\u003eAt Hawk Performance we pride ourselves on optimizing the braking experience for maximum performance but that doesn't stop at pads and rotors. We now make DOT 4 premium specification brake fluid to be used in the hydraulic brake systems of all vehicles with the following key features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAvailable in 500ml bottle\u003c\/li\u003e\n\u003cli\u003eDOT 4 brake fluid that is above OE spec\u003c\/li\u003e\n\u003cli\u003eMinimum dry boiling point of 500F \/ 260C\u003c\/li\u003e\n\u003cli\u003eMade for high performance street specifications\u003c\/li\u003e\n\u003cli\u003eHandles a higher dry boiling point than a typical off the shelf brake fluid\u003c\/li\u003e\n\u003cli\u003eHigher dry boiling point leads to maximum stopping power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"prop65\"\u003e\n\u003ch3\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/prop65_10pt.png?v=1611080686\" alt=\"Warning Prop 65\"\u003e WARNING\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":40827773354176,"sku":"HWKHP520","price":14.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/products\/Hawk_HP520_Brake_Fluid_600x600_9cbf115d-568a-4057-94ad-5bcf42629710.jpg?v=1632166419"},{"product_id":"hawk-hp600-brake-fluid-500ml","title":"Hawk HP600 Brake Fluid - 500mL","description":"\u003cdiv\u003e\n\u003ch2\u003eHawk HP600 Race Brake Fluid\u003c\/h2\u003e\n\u003cp\u003eSpecifically formulated to provide the highest performance under racing conditions, where braking systems must operate at very high temperatures without compromise, Hawk Performance offers HP600 brake fluid with the following key features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAvailable in 500ml bottle\u003c\/li\u003e\n\u003cli\u003ePremium DOT 4 brake fluid that is above OE spec\u003c\/li\u003e\n\u003cli\u003eMinimum dry boiling point of 572F \/ 300C\u003c\/li\u003e\n\u003cli\u003eMinimum wet boiling point of 383F \/ 195C\u003c\/li\u003e\n\u003cli\u003eMade for high performance race specifications\u003c\/li\u003e\n\u003cli\u003eHigher dry boiling point leads to maximum stopping power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"prop65\"\u003e\n\u003ch3\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/prop65_10pt.png?v=1611080686\" alt=\"Warning Prop 65\"\u003e WARNING\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":40827793277120,"sku":"HWKHP600","price":22.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/products\/Hawk_HP600_Brake_Fluid_600x600_d0c120b4-b6c9-4bd3-9e35-296ffd34da8e.jpg?v=1632166549"},{"product_id":"hawk-hp660-brake-fluid-500ml","title":"Hawk HP660 Brake Fluid - 500mL","description":"\u003cdiv\u003e\n\u003ch2\u003eHawk HP660 High Temp Race Brake Fluid\u003c\/h2\u003e\n\u003cp\u003eWhen extreme motorsports environments meet extreme temperatures, there is no time for second guessing. Our Hi Temp race brake fluid pulls out all the stops to offer class-leading boiling points for reliable, consistent braking performance. HP660 brake fluid features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAvailable in 500ml bottle\u003c\/li\u003e\n\u003cli\u003ePremium DOT 4 brake fluid that is above OE spec\u003c\/li\u003e\n\u003cli\u003eMinimum dry boiling point of 608F \/ 320C\u003c\/li\u003e\n\u003cli\u003eMinimum wet boiling point of 383F \/ 195C\u003c\/li\u003e\n\u003cli\u003eMade for high performance race specifications\u003c\/li\u003e\n\u003cli\u003eHigher dry boiling point leads to maximum stopping power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"prop65\"\u003e\n\u003ch3\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/prop65_10pt.png?v=1611080686\" alt=\"Warning Prop 65\"\u003e WARNING\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":40827807301824,"sku":"HWKHP660","price":29.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/products\/Hawk_HP660_Brake_Fluid_600x600_bced6cc3-1641-4e0c-921d-2a706208e26a.jpg?v=1632167162"},{"product_id":"wilwood-ht570-brake-fluid-12oz","title":"Wilwood HT570 Brake Fluid - 12oz","description":"\u003cdiv\u003e\n\u003ch2\u003eWilwood High Temp 570 Brake Fluid\u003c\/h2\u003e\n\u003cp\u003eWilwoods specially formulated Hi-Temp 570 Racing Brake Fluid has a minimum 570F. dry boiling point of to withstand the severe heat requirements of automotive racing. Hi-Temp 570 low viscosity allows easy bleeding of your brake system, eliminating aeration of the brake fluid caused by foaming due to excessive pumping of the pedal.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAvailable in 12oz bottle\u003c\/li\u003e\n\u003cli\u003eMinimum dry boiling point of 573F\u003c\/li\u003e\n\u003cli\u003eMinimum wet boiling point of 313F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"prop65\"\u003e\n\u003ch3\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/prop65_10pt.png?v=1611080686\" alt=\"Warning Prop 65\"\u003e WARNING\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":40828188033216,"sku":"WILHT570","price":14.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/products\/Wilwood_WIL570_Brake_Fluid_600x600_0194c3d4-2f23-495f-b165-4eb2dd30b1c1.jpg?v=1632177371"},{"product_id":"hawk-performance-hb471f-510-brake-pads-front","title":"Hawk Performance HPS Brake Pads - Front","description":"\u003cdiv\u003e\n\u003ch2\u003eHawk Performance HPS\u003c\/h2\u003e\n\u003cp\u003eHawk HPS (High Performance Street) brake pads are world renowned for increasing stopping power on your street driven vehicle. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance's HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology. The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you'll have a highly durable brake pad with less brake dust.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\n\u003ch2\u003eExpert Opinion\u003c\/h2\u003e\n\u003cp\u003eThe Hawk HPS compound, in most cases, will provide increased brake torque and operating temperature when compared to OEM pads. There will also be a decrease in brake dust. With an upper end operating temperature of 800-900 Deg F, the HPS compound can withstand light track use as long as you are aware of the signs of over-heating and allow proper cool off time when the pads approach their upper temperature. The Hawk HPS compound is not a race compound and it can not withstand prolonged race sessions at high temperatures. Concerning brake dust, the HPS will be cleaner than your OEM Pads, but create more dust than the Hawk Ceramic compound. The performance improvement over Hawk Ceramic comes at the cost of increased dust production.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\n\u003ch2\u003eHawk HPS Compound Characteristics:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSmooth braking Feel\u003c\/li\u003e\n\u003cli\u003eExcellent for Spirited Driving\u003c\/li\u003e\n\u003cli\u003eGentle on Pads and Rotors\u003c\/li\u003e\n\u003cli\u003eConsistent Release Characteristics\u003c\/li\u003e\n\u003cli\u003eIncreased Stopping Power\u003c\/li\u003e\n\u003cli\u003e100-700 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e100-500 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003ch2\u003eCompound Chart\u003c\/h2\u003e\n\u003cdiv id=\"product-chart\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/Hawk_HPS_Chart.jpg?v=1628638952\" alt=\"Hawk Performance HPS Chart\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv id=\"prop65\"\u003e\n\u003ch3\u003e\n\u003cimg alt=\"Warning Prop 65\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/prop65_10pt.png?v=1611080686\"\u003e WARNING\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e[instruction]\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\r\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e\n\u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e\n\u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e\n\u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e\n\u003c\/ul\u003e[\/instruction][warranty]\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/HAWK_WARRENTY_RMA_FORM.pdf?v=1610998994\" target=\"_blank\"\u003eDownload Warranty Claim Form\u003c\/a\u003e\u003c\/p\u003e[\/warranty]","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":40862404444352,"sku":"HWKHB471F.510","price":187.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/products\/Hawk_HPS_1000x1000_8d4fadcb-2a50-4e86-a971-31f5329011d7.jpg?v=1643236749"},{"product_id":"hawk-performance-hb471b-510-brake-pads-front","title":"Hawk Performance HPS 5.0 Brake Pads - Front","description":"\u003cdiv\u003e\n\u003ch2\u003eHawk Performance HPS 5.0\u003c\/h2\u003e\n\u003cp\u003eFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter to its limits. The Hawk HPS 5.0 (High Performance Street 5.0) brake pad compound gives your vehicle the greatest possible stopping power and pedal feel without compromising ABS. HPS 5.0 is a Ferro-Carbon compound that provides advanced braking characteristics to enhance the driving experience. This compound combines the safety and quality of aerospace design with the braking technology of motorsports. The results are shorter stopping distances, improved performance under heavy braking conditions, and street car friendly characteristics.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\n\u003ch2\u003eExpert Opinion\u003c\/h2\u003e\n\u003cp\u003eThe Hawk HPS 5.0 is a good choice if you are looking to increase your street performance to the maximum level possible without suffering the adverse side effects of noise and large amounts of brake dust commonly associated with higher performance pads. The HPS 5.0 will provide increased brake torque and operating temperature when compared to the Hawk HPS compound. The HPS 5.0 compound can withstand light track use as long as you are aware of the signs of over-heating and allow proper cool off time when the pads approach their upper temperature. The Hawk HPS 5.0 compound is not a race compound and it can not withstand prolonged race sessions at high temperatures. The HPS 5.0 Compound will be cleaner than most OEM Pads, but produce more brake dust than the Hawk Ceramic and Hawk HPS.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\n\u003ch2\u003eHawk HPS 5.0 Compound Characteristics:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAggressive Torque\u003c\/li\u003e\n\u003cli\u003eGreat Rotor and Pad Wear\u003c\/li\u003e\n\u003cli\u003eSmooth, Predictable Control\u003c\/li\u003e\n\u003cli\u003eHigh Rates of Deceleration\u003c\/li\u003e\n\u003cli\u003eConsistent Release Characteristics\u003c\/li\u003e\n\u003cli\u003e100-750 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e100-550 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003ch2\u003eCompound Chart\u003c\/h2\u003e\n\u003cdiv id=\"product-chart\"\u003e\u003cimg alt=\"Hawk Performance HPS 5.0 Chart\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/Hawk_HPS50_Chart.jpg?v=1628638561\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv id=\"prop65\"\u003e\n\u003ch3\u003e\n\u003cimg alt=\"Warning Prop 65\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/prop65_10pt.png?v=1611080686\"\u003e WARNING\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e[instruction]\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e\n\u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e\n\u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e\n\u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e\n\u003c\/ul\u003e[\/instruction][warranty]\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/HAWK_WARRENTY_RMA_FORM.pdf?v=1610998994\" target=\"_blank\"\u003eDownload Warranty Claim Form\u003c\/a\u003e\u003c\/p\u003e[\/warranty]","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":40862574411968,"sku":"HWKHB471B.510","price":199.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/products\/Hawk_HPS50_1000x1000_8b883466-6fb5-4306-8b39-c1bf955ed8e2.jpg?v=1643238580"},{"product_id":"hawk-talon-htc4033-brake-rotors-front","title":"Hawk Talon Drilled and Slotted Rotors - Pair - Front","description":"\u003cdiv\u003e\n\u003ch2\u003eHawk Performance Talon Drilled \u0026amp; Slotted Rotors\u003c\/h2\u003e\n\u003cp\u003eDecades of experience, continuous research and development, and dedication to bringing the highest quality premium friction products have led to Hawk Talon Rotors. Leveraging the high quality performance of Hawk Performance's unique and proprietary DTC curved slot design, they are built to OE specifications, weights, and production processes, and are engineered to fit a vehicle's current braking system without modification.\u003c\/p\u003e\n\u003cp\u003eHawk's Talon Slotted Disc Brake Rotors are precision engineered, machined, finished, and weather-fortified in North America to ensure durability and enable to pass the ISO-9227 salt-spray test for long-lasting good looks even on notorious salted roads. For improved brake pad \"bite\", the racing style hook-slots from Hawk's renowned DTC racing rotors have been integrated into these new performance street brake rotors using precision CNC machining.\u003c\/p\u003e\n\u003cp\u003eSold and priced in pairs, an ideal choice for high performance driving, towing and even track days. Hawk Talon Truck Brake Rotors - Ideal rotor upgrade for towing or high performance driving. Made in North America by Hawk for select vehicles, check your application.\u003c\/p\u003e\n\u003cp\u003eHawk Rotors are Engineered, machined, finished, and coated in ISO certified facilities in North America Hawk TALON ROTORS® produced from Grade 3000 Cast Iron-black coated Validated and verified brake rotor design and performance characteristics through extensive brake dynamometer testing Proven cross-drilled designs to optimize thermal efficiency, heat dissipation, strength, and improve wet braking Hawk Talon brake rotors are balanced and incorporate precision milled slots to reduce harmonic resonance issues Exclusive and proven Hawk DTC Slotted design is CNC integrated into heavy duty slotted-rotor only applications Black Magni brake rotor coating barrier applied that maintains superior corrosion resistance and ensures quick and easy bed-in that resists galling and is Salt-spray tested per ISO-9227, exceeding the 240 hours requirement.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\n\u003ch2\u003eExpert Opinion\u003c\/h2\u003e\n\u003cp\u003eHawk Talon Drilled \u0026amp; Slotted rotors are a quality high carbon rotor that will last and perform well on street applications. The slotted only version will hold up to moderate track use, but expect to see higher rates of wear when used with aggressive track pads.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\n\u003ch2\u003eHawk Talon Slotted Rotor Characteristics:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eO.E. fitment, weight and production process\u003c\/li\u003e\n\u003cli\u003eDTC-curved slot design\u003c\/li\u003e\n\u003cli\u003eReduction in noise\u003c\/li\u003e\n\u003cli\u003eImproved heat dissipation and wet braking\u003c\/li\u003e\n\u003cli\u003eCorrosion and galling resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv id=\"prop65\"\u003e\n\u003ch3\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/prop65_10pt.png?v=1611080686\" alt=\"Warning Prop 65\"\u003e WARNING\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e[instruction]\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e\n\u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e\n\u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e\n\u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e\n\u003c\/ul\u003e[\/instruction][warranty]\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance® branded products of equal or greater value.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e* Disclaimer to “Limited Life-Time Warranty”: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this product’s ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/HAWK_WARRENTY_RMA_FORM.pdf?v=1610998994\" target=\"_blank\"\u003eDownload Warranty Claim Form\u003c\/a\u003e\u003c\/p\u003e[\/warranty]","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":40874437411008,"sku":"HWKHTC4033","price":315.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/products\/Hawk_TalonX_600x600_432d1e67-15cf-4dd1-9437-8bd30616b933.jpg?v=1632665080"}],"url":"https:\/\/www.hawkpadsdirect.com\/en-ca\/collections\/hawk-performance-brakes-for-1967-ford-mustang-w-front-disc-brakes.oembed","provider":"Hawk Pads Direct","version":"1.0","type":"link"}