{"title":"Hawk Performance Brakes for 2004 Ford Taurus - w\/Rear Drum Brakes","description":null,"products":[{"product_id":"motul-rbf600-brake-fluid-500ml","title":"Motul RBF600 Brake Fluid - 500mL","description":"\u003cdiv\u003e\n\u003ch2\u003eMotul RBF600 Brake Fluid\u003c\/h2\u003e\n\u003cp\u003eExtreme high performance polyglycol brake fluid. Far exceeds the standards of DOT 4. Each bottle is filled with Nitrogen, increasing shelf life and eliminating contamination while factory sealed. Extremely high dry boiling point 594F(312C) helps prevent vapor lock and brake fade during hard use, with excellent recovery time. Wet boiling point 399F(204C).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eType of Use\u003c\/h2\u003e\n\u003cp\u003eAll types of hydraulic actuated brake and clutch systems requiring a non-silicone synthetic fluid. Specially designed to resist to high temperature of racing actuated brake (steel or carbon) and clutch systems. Exceeds DOT 5.1 and DOT 3 standards also, except for viscosity at -40degC (-40degF).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003ePerformance\u003c\/h2\u003e\n\u003cp\u003eStandards: FMVSS 116 DOT 4 \/ SAE J 1703 \/ ISO 4925\u003c\/p\u003e\n\u003ch3\u003eExtreme thermal resistance and stability\u003c\/h3\u003e\n\u003cp\u003eThe very high boiling point (312degC \/ 594degF), superior to conventional DOT 5.1 non silicone base \/ DOT 5 silicone base fluids (260degC \/ 500degF mini) and DOT 4 (230degC \/ 446degF mini) enables an effective brake even under extreme conditions.\u003c\/p\u003e\n\u003ch3\u003eEfficient when rainy\u003c\/h3\u003e\n\u003cp\u003eThe very high wet boiling point (204degC \/ 399degF) superior to conventional DOT 5.1 non-silicone base fluid (180degC \/ 356degF mini) and DOT 4 (155degC \/ 311degF mini) enables to keep an efficient brake system when rainy. Indeed, DOT 3, DOT 4 and DOT 5.1 brake fluids have the property to absorb humidity in the air, which reduces their boiling points and increases the risk to get to vapor lock phenomena. The wet boiling point is measured by humidifying the product with about 3.5 percent of water.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eRecommendations\u003c\/h2\u003e\n\u003cp\u003eAvoid mixing with polyglycols based brake fluid with lower performances. Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM). Store brake fluid in its original container, tightly closed to prevent absorption of moisture. Aggressive chemical product if contact with hands, paint or varnish. If skin contact, rinse thoroughly with water.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"prop65\"\u003e\n\u003ch3\u003e\n\u003cimg alt=\"Warning Prop 65\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/prop65_10pt.png?v=1611080686\"\u003e WARNING\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Motul","offers":[{"title":"Default Title","offer_id":40827480309952,"sku":"MOTRBF600","price":19.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/products\/Motul_RBF600_600x600_7dd498cc-8405-4f9f-99fd-bbd239596463.jpg?v=1632161927"},{"product_id":"motul-rbf660-brake-fluid-500ml","title":"Motul RBF660 Brake Fluid - 500mL","description":"\u003cdiv\u003e\n\u003ch2\u003eMotul RBF660 Brake Fluid\u003c\/h2\u003e\n\u003cp\u003eVery high dry boiling point of 622F (328C) and a wet boiling point of 399F (204C). For all types of hydraulic brake and clutch actuators requiring non-silicone synthetic fluid. Specially designed to resist extreme temperature generated by racing brakes (carbon and ceramic) only allowing a minimal air entrance for brake cooling.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eType of Use\u003c\/h2\u003e\n\u003cp\u003eAll types of hydraulic brake and clutch actuators requiring non-silicone synthetic fluid. Specially designed to resist to extreme temperature generated by racing carbon and ceramic brakes allowing minimizing air entrance for brake cooling. Can be also used with conventional steel discs and clutch systems actuators. Widely exceeds DOT 3, DOT 4 and DOT 5.1 standards (except for DOT 5.1 viscosity at - 40C).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003ePerformance\u003c\/h2\u003e\n\u003cp\u003eStandards: FMVSS 116 DOT 4 \/ SAE J1703\u003c\/p\u003e\n\u003ch3\u003eExtreme thermal resistance and stability\u003c\/h3\u003e\n\u003cp\u003eVery high boiling point (328C \/ 622F), superior to conventional DOT 5.1 fluids (260C \/ 500F mini) and DOT 4 (230C \/ 446F mini) Enables effective brake even in extreme conditions. Better aerodynamic performance by reducing air entrance for brake cooling on cars.\u003c\/p\u003e\n\u003ch3\u003eEfficient when rainy\u003c\/h3\u003e\n\u003cp\u003eVery high wet boiling point (204C \/ 399F) superior to conventional DOT 5.1 non-silicone base fluid (180C \/ 356F mini) and DOT 4 (155C \/ 311F mini) enables to keep efficient braking in wet conditions. Brake fluids tend to absorb humidity from the air, which reduce boiling point and increase the risk to get to vapor lock phenomena. The wet boiling point is measured by humidifying the product with about 3.5 Percent of water.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eRecommendations\u003c\/h2\u003e\n\u003cp\u003eAvoid mixing with polyglycols based brake fluid with lower performances. Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM). Store brake fluid in its original container, tightly closed to prevent absorption of moisture. Aggressive chemical product if contact with hands, paint or varnish. If skin contact, rinse thoroughly with water.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"prop65\"\u003e\n\u003ch3\u003e\n\u003cimg alt=\"Warning Prop 65\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/prop65_10pt.png?v=1611080686\"\u003e WARNING\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Motul","offers":[{"title":"Default Title","offer_id":40827594047680,"sku":"MOTRBF660","price":29.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/products\/Motul_RBF660_Brake_Fluid_600x600_c3539083-78b6-48f3-9688-3fa02072ca40.jpg?v=1632162956"},{"product_id":"motul-dot5-1-brake-fluid-500ml","title":"Motul DOT5.1 Brake Fluid - 500mL","description":"\u003cdiv\u003e\n\u003ch2\u003eMotul MOT5.1 Brake Fluid\u003c\/h2\u003e\n\u003cp\u003e100% synthetic brake fluid on polyglycol basis for all types of hydraulic actuated brake and clutch systems in accordance with DOT 5.1, DOT 4 and DOT 3 manufacturers’ recommendations. Specially designed for anti-locking brake system (ABS). Dry boiling point of 516F (272C)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eType of Use\u003c\/h2\u003e\n\u003cp\u003eAll types of hydraulic actuated brake and clutch systems in accordance with DOT 5.1, DOT 4 and DOT 3 manufacturers recommendations. Fluidity specially designed for anti-locking brake systems (ABS).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003ePerformance\u003c\/h2\u003e\n\u003cp\u003eStandards: FMVSS 116 DOT 5.1 NON SILICONE BASE\/DOT 4\/DOT 3\/SAE J 1703\/ ISO 4925 (5.1, 4, 3)\u003c\/p\u003e\n\u003ch3\u003eLong Life Fluid\u003c\/h3\u003e\n\u003cp\u003eThe high wet boiling point (187C \/ 369F), superior to DOT 4 (155C \/ 311F mini) and DOT 3 (140C \/284F mini) conventional fluids enables to use this product longer. Indeed, DOT 3 \/ DOT 4 and DOT 5.1 brake fluids have the property to absorb humidity contained in the air, which reduces their boiling points and consequently security. The wet boiling point is representative of the fluid after one year of use.\u003c\/p\u003e\n\u003ch3\u003eSpecially designed for anti-locking brake systems (ABS)\u003c\/h3\u003e\n\u003cp\u003eThe viscosity (820 centipoises at -40C \/ -40F) lower than DOT 4 (up to 1800 cp) and DOT 3 (up to 1500 cp) brake fluids allows an easier fluid circulation in micro-valves of anti-locking systems. Perfectly neutral with seals used in braking systems. Anti-corrosion.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eRecommendations\u003c\/h2\u003e\n\u003cp\u003eMixable with DOT 3, DOT 4 and DOT 5.1 NON SILICONE BASE products. Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM). Store brake fluid in its original container, tightly closed to avoid absorption of moisture. Aggressive chemical product if contact with hands, paint or varnish. If skin contact, rinse thoroughly with water. Drain Interval: 12 to 24 month as per manufacturers recommendations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"prop65\"\u003e\n\u003ch3\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/prop65_10pt.png?v=1611080686\" alt=\"Warning Prop 65\"\u003e WARNING\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Motul","offers":[{"title":"Default Title","offer_id":40827626586304,"sku":"MOTDOT5.1","price":14.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/products\/Motul_DOT51_Brake_Fluid_600x600_539051f3-5945-443e-8eef-3b8fc908895e.jpg?v=1632163515"},{"product_id":"hawk-rhp520-brake-fluid-500ml","title":"Hawk HP520 Brake Fluid - 500mL","description":"\u003cdiv\u003e\n\u003ch2\u003eHawk HP520 Brake Fluid\u003c\/h2\u003e\n\u003cp\u003eAt Hawk Performance we pride ourselves on optimizing the braking experience for maximum performance but that doesn't stop at pads and rotors. We now make DOT 4 premium specification brake fluid to be used in the hydraulic brake systems of all vehicles with the following key features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAvailable in 500ml bottle\u003c\/li\u003e\n\u003cli\u003eDOT 4 brake fluid that is above OE spec\u003c\/li\u003e\n\u003cli\u003eMinimum dry boiling point of 500F \/ 260C\u003c\/li\u003e\n\u003cli\u003eMade for high performance street specifications\u003c\/li\u003e\n\u003cli\u003eHandles a higher dry boiling point than a typical off the shelf brake fluid\u003c\/li\u003e\n\u003cli\u003eHigher dry boiling point leads to maximum stopping power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"prop65\"\u003e\n\u003ch3\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/prop65_10pt.png?v=1611080686\" alt=\"Warning Prop 65\"\u003e WARNING\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":40827773354176,"sku":"HWKHP520","price":14.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/products\/Hawk_HP520_Brake_Fluid_600x600_9cbf115d-568a-4057-94ad-5bcf42629710.jpg?v=1632166419"},{"product_id":"hawk-hp600-brake-fluid-500ml","title":"Hawk HP600 Brake Fluid - 500mL","description":"\u003cdiv\u003e\n\u003ch2\u003eHawk HP600 Race Brake Fluid\u003c\/h2\u003e\n\u003cp\u003eSpecifically formulated to provide the highest performance under racing conditions, where braking systems must operate at very high temperatures without compromise, Hawk Performance offers HP600 brake fluid with the following key features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAvailable in 500ml bottle\u003c\/li\u003e\n\u003cli\u003ePremium DOT 4 brake fluid that is above OE spec\u003c\/li\u003e\n\u003cli\u003eMinimum dry boiling point of 572F \/ 300C\u003c\/li\u003e\n\u003cli\u003eMinimum wet boiling point of 383F \/ 195C\u003c\/li\u003e\n\u003cli\u003eMade for high performance race specifications\u003c\/li\u003e\n\u003cli\u003eHigher dry boiling point leads to maximum stopping power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"prop65\"\u003e\n\u003ch3\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/prop65_10pt.png?v=1611080686\" alt=\"Warning Prop 65\"\u003e WARNING\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":40827793277120,"sku":"HWKHP600","price":22.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/products\/Hawk_HP600_Brake_Fluid_600x600_d0c120b4-b6c9-4bd3-9e35-296ffd34da8e.jpg?v=1632166549"},{"product_id":"hawk-hp660-brake-fluid-500ml","title":"Hawk HP660 Brake Fluid - 500mL","description":"\u003cdiv\u003e\n\u003ch2\u003eHawk HP660 High Temp Race Brake Fluid\u003c\/h2\u003e\n\u003cp\u003eWhen extreme motorsports environments meet extreme temperatures, there is no time for second guessing. Our Hi Temp race brake fluid pulls out all the stops to offer class-leading boiling points for reliable, consistent braking performance. HP660 brake fluid features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAvailable in 500ml bottle\u003c\/li\u003e\n\u003cli\u003ePremium DOT 4 brake fluid that is above OE spec\u003c\/li\u003e\n\u003cli\u003eMinimum dry boiling point of 608F \/ 320C\u003c\/li\u003e\n\u003cli\u003eMinimum wet boiling point of 383F \/ 195C\u003c\/li\u003e\n\u003cli\u003eMade for high performance race specifications\u003c\/li\u003e\n\u003cli\u003eHigher dry boiling point leads to maximum stopping power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"prop65\"\u003e\n\u003ch3\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/prop65_10pt.png?v=1611080686\" alt=\"Warning Prop 65\"\u003e WARNING\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":40827807301824,"sku":"HWKHP660","price":29.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/products\/Hawk_HP660_Brake_Fluid_600x600_bced6cc3-1641-4e0c-921d-2a706208e26a.jpg?v=1632167162"},{"product_id":"wilwood-ht570-brake-fluid-12oz","title":"Wilwood HT570 Brake Fluid - 12oz","description":"\u003cdiv\u003e\n\u003ch2\u003eWilwood High Temp 570 Brake Fluid\u003c\/h2\u003e\n\u003cp\u003eWilwoods specially formulated Hi-Temp 570 Racing Brake Fluid has a minimum 570F. dry boiling point of to withstand the severe heat requirements of automotive racing. Hi-Temp 570 low viscosity allows easy bleeding of your brake system, eliminating aeration of the brake fluid caused by foaming due to excessive pumping of the pedal.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAvailable in 12oz bottle\u003c\/li\u003e\n\u003cli\u003eMinimum dry boiling point of 573F\u003c\/li\u003e\n\u003cli\u003eMinimum wet boiling point of 313F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"prop65\"\u003e\n\u003ch3\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/prop65_10pt.png?v=1611080686\" alt=\"Warning Prop 65\"\u003e WARNING\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":40828188033216,"sku":"WILHT570","price":14.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/products\/Wilwood_WIL570_Brake_Fluid_600x600_0194c3d4-2f23-495f-b165-4eb2dd30b1c1.jpg?v=1632177371"},{"product_id":"sp-performance-c54-030-brake-rotors-front","title":"SP Peformance Cross Drilled Rotors - Front","description":"\u003cdiv\u003e\n\u003ch2\u003eSP Performance Cross Drilled Brake Rotors\u003c\/h2\u003e\n\u003cp\u003eSP Performance Cross Drilled Rotors have taken it to the next level by eliminating the sharp edges on our Cross Drilled holes. By doing this, it greatly reduces the chance of cracking and lowers the rotor temperature by moving the air and brake dust from the disc brake surface. By keeping the surface temperature down, this nearly eliminates heat checking and warping. The Cross Drilled holes also reduce the risk of hydroplaning when hitting a puddle by allowing the water to not get trapped between the brake pads and the brake rotors. The anti-corrosion coating is available in three colors; Gray ZRC, Silver ZRC, and Black ZRC.\u003c\/p\u003e\n\u003cp\u003eAll SP Performance Rotors are manufactured to OEM specifications, machine balanced and coated with your choice or ZRC color.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufactured in the USA\u003c\/strong\u003e - All rotors are machined and plated to order by SP Performance employees.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\n\u003ch2\u003eSP Cross Drilled Brake Rotor Characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross Drilled Holes\u003c\/strong\u003e - SP Cross-Drilled Rotors are designed with structural integrity in mind. Each rotor structure is carefully analyzed and the best pattern is utilized for strength and integrity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced Hole Chamfering\u003c\/strong\u003e The holes are drilled with our exclusive Sinusoid Curve Chamfer, which promotes cooling and minimizes stress. The chamfer maximizes air circulation, and with absolutely no sharp edge, it reduces the possibility of heat checking and increases both rotor and pad life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion Resistant Finish\u003c\/strong\u003e - Corrosion resistant finishes give a stunning clean look behind your wheels while preventing rust, corrosion and oxidation. Available in a Gray ZRC, Silver ZRC, or Black ZRC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuality\u003c\/strong\u003e - Our slotted and drilled discs are made using the finest quality castings that exceed OEM specifications. Designed with the use of CAD software and produced on CNC machines insures the highest quality and consistent performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\n\u003ch2\u003eSP Performance Sinusoidal Curved Chamfered Hole\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"SP Performance Rotor Sinusoidal Chamfer\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/SP_Chamfer.jpg?v=1618441172\"\u003e\u003c\/p\u003e\n\u003cp\u003eAfter many years of development we have come up with a drilling and chamfering method that absolutely has no sharp edges. Our brake discs are drilled with our exclusive sinusoid curved chamfer. The chamfer promotes cooling, minimizes stress, vents moisture and dust while minimizing heat checking and cracking. The smooth design also increases both rotor and pad life.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\n\u003ch2\u003eHow Cross Drilled Brake Rotors Work\u003c\/h2\u003e\n\u003cp\u003eCross Drilled Rotors, as mentioned above, are the go to for all performance car manufacturers. The reason for this is the ability for the holes to keep the brake pads and brake rotors as cool as possible during heavy braking. The cross drilled holes, just like in the drilled and slotted brake rotors, will keep the brakes cooler and help with removing water to prevent hydroplaning. While Cross Drilled rotors look amazing and perform great, there is a risk that comes with them. There is always the chance of these brake rotors developing stress cracks when under extreme use, the radial chamfer on SP Rotors will reduce those stress cracks. Also, during normal street use, the rotors will never see enough heat to create stress cracks, however, with that said, these rotors are not recommended for track use.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv id=\"prop65\"\u003e\n\u003ch3\u003e\n\u003cimg alt=\"Warning Prop 65\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/prop65_10pt.png?v=1611080686\"\u003e WARNING\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\r\n[instruction]\u003ch3\u003eSP Performance Rotor Installation Procedure\u003c\/h3\u003e\u003cimg alt=\"SP Performance Rotor Installation Instructions - Page 1\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/SP_Performance_Installation_1.jpg?v=1617830774\"\u003e\u003cimg alt=\"SP Performance Rotor Installation Instructions - Page 2\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/SP_Performance_Installation_2.jpg?v=1617830774\"\u003e[\/instruction][warranty]\u003ch3\u003eSP Performance Limited Lifetime Warranty\u003c\/h3\u003e\u003cp\u003eSP Performance rotors are warranted to be free of defects in workmanship, and are guaranteed not to crack for the life of the rotor*.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e*The life of the rotor is measured by the minimal thickness. Warranty does not apply to worn out rotors.\u003c\/strong\u003e\u003c\/p\u003e\u003ch4\u003eWarranty does NOT cover the following:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBrake noise or squealing.\u003c\/li\u003e\n\u003cli\u003eRotors worn to minimum thickness.\u003c\/li\u003e\n\u003cli\u003ePulsation caused by other factors such as a faulty caliper, worn out hardware, or excessive brake pad material transfer.\u003c\/li\u003e\n\u003cli\u003eDamage caused by excessive overheating (bluing) of the rotors.\u003c\/li\u003e\n\u003cli\u003eOff-road, commercial, or racing applications.\u003c\/li\u003e\n\u003cli\u003eImproper installation, modification, or product abuse.\u003c\/li\u003e\n\u003cli\u003eShipping charges.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003ch4\u003eTerms and conditions of the warranty:\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eThe warranty must be filed within 30 days of purchase.\u003c\/strong\u003e Save your original receipt. If you have a warranty claim, call us for return authorization. No returns will be accepted without an authorization number on the outside of the box. The original receipt of purchase must be included with the return. This warranty applies to the original purchaser only, and that the product was installed in accordance with the manufacturers recommendations. This warranty does not apply to commercial vehicles or vehicles used in racing.\u003c\/p\u003e\u003cp\u003eSP Performance will not pay for any labor or consequential damages or materials which may be necessary for replacement of its products. The warranty is limited to the exchange of the product only, and only after the manufacturers inspection of the defect. No other warranty is hereby given or implied. SP Performance does not accept or assume any liability from damages resulting from errors, changes, or improper installation of its products.\u003c\/p\u003e\u003ch4\u003eTo register this warranty, here is all you have to do:\u003c\/h4\u003e\u003cp\u003eFill out the warranty registration online at \u003ca href=\"https:\/\/www.sp-performance.com\/\"\u003ewww.sp-performance.com\u003c\/a\u003e within 30 days of purchase. Save your original receipt. If you have a warranty claim, call us for a return authorization. No returns will be accepted without having the authorization number on the outside of the box. The original receipt of the purchase must be included with the claim.\u003c\/p\u003e\u003ch4\u003eTo file a claim:\u003c\/h4\u003e\u003cp\u003ePlease call for a return authorization. Original receipt and warranty registration number will be required for the authorization.\u003c\/p\u003e\u003ch4\u003eAdditional information if applicable:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eA detailed description of the problem.\u003c\/li\u003e\n\u003cli\u003eHigh quality digital photos.\u003c\/li\u003e\n\u003cli\u003eRunout specifications.\u003c\/li\u003e\n\u003cli\u003eVehicle mileage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003ch4\u003eIf a claim is filed:\u003c\/h4\u003e\r\n\u003cp\u003eThe product has to be returned to SP Performance for inspection at the customers expense (shipping is not covered under warranty). The product is inspected for claimed defect, and if the condition of the product is deemed defective, a replacement of the product will be shipped at no charge less shipping. If the condition of the product is determined to be acceptable, no replacement will be given. No packages will be accepted without the authorization number on the box.\u003c\/p\u003e[\/warranty]","brand":"SP Performance","offers":[{"title":"Standard ZRC Finish","offer_id":41040843145408,"sku":"SPPC54-030","price":252.22,"currency_code":"USD","in_stock":true},{"title":"Black ZRC Finish","offer_id":41040843178176,"sku":"SPPC54-030-B","price":252.22,"currency_code":"USD","in_stock":true},{"title":"Silver ZRC Finish","offer_id":41040843210944,"sku":"SPPC54-030-P","price":252.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/products\/SP_Performance_C_Gray_594f580f-76e9-48be-9792-610794e31928.jpg?v=1634749378"},{"product_id":"sp-performance-d54-030-brake-rotors-front","title":"SP Performance Diamond Slotted Brake Rotors - Front","description":"\u003cdiv\u003e\n\u003ch2\u003eSP Performance Diamond Slotted Brake Rotors\u003c\/h2\u003e\n\u003cp\u003eSP Performance slotted brake rotors provide excellent stopping power while looking great. The slots on the brake rotor surface expel the brake dust away from your braking surface and wheels. This keeps the braking surface cooler. All SP Performance Brake rotors are machine balanced and disc ground and meet or exceed OEM specification. The slotted brake rotors are direct replacements to your existing brake rotors and require no brake system modifications. All slotted brake rotors come with your choice of coating for rust prevention. The anti-corrosion coating is available in three colors; Gray ZRC, Silver ZRC, and Black ZRC.\u003c\/p\u003e\n\u003cp\u003eSlotted rotors are the preferred pattern for track cars as there is no risk of cracking due to heavy braking. The slots on the rotor is also one of the best ways to combat brake fade and maintain consistent stopping power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufactured in the USA\u003c\/strong\u003e - All rotors are machined and plated to order by SP Performance employees.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\n\u003ch2\u003eOur Review\u003c\/h2\u003e\n\u003cp\u003eThe slotted only version of SP Performance rotors are the most durable version. They will hold up very well to heavy vehicles and high heat situations. If you have a heavy vehicle (3\/4 or 1 ton) or are notoriously hard on rotors, these are a great choice.\u003c\/p\u003e\n\u003c\/div\u003e\u003ch2\u003eSP Diamond Slotted Brake Rotor Characteristics\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirectional Angles Slots\u003c\/strong\u003e - The directional slots help increase pad bite, improve air circulation, and increase cooling. The slots also reduce fade and stop brake hydroplaning in bad weather. This greatly improving braking efficiency and reduces stopping distance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirectional Mini Half Slot\u003c\/strong\u003e - Mini Slots help to balance and stabilize friction level as well as optimizing pad contact. They also give the rotor a unique look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion Resistant Finish\u003c\/strong\u003e - Anti-Corrosion finishes give you a stunning clean look behind your wheels while preventing rust, corrosion, and oxidation. Available in Silver ZRC, Gray ZRC, or Black ZRC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuality\u003c\/strong\u003e - SP Performance slotted rotors are made using the finest quality castings that exceed OEM specifications. They are designed with the use of CAD software and machined with CNC equipment, ensuring the highest quality and consistent performance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv\u003e\n\u003ch2\u003eHow Slotted Brake Rotors Work\u003c\/h2\u003e\n\u003cp\u003eSlotted brake rotors are used to move unwanted material and gasses away from the brake rotor and brake pad surfaces. Gasses are created by the repeated use of heavy braking, which causes a layer of brake dust and gasses to build up between the brake pad surface and the brake rotor surface. This will push the the brake pad away from the rotor surface. By adding slots to the surfaces of the brake rotor, those gasses are allowed to escape. This will creates a solid bite between the brake pad to brake rotor. As the gasses escape, the brake rotor and pad surface stay cooler, helping to eliminate brake fade.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv id=\"prop65\"\u003e\n\u003ch3\u003e\n\u003cimg alt=\"Warning Prop 65\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/prop65_10pt.png?v=1611080686\"\u003e WARNING\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e[instruction]\u003ch3\u003eSP Performance Rotor Installation Procedure\u003c\/h3\u003e\u003cimg alt=\"SP Performance Rotor Installation Instructions - Page 1\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/SP_Performance_Installation_1.jpg?v=1617830774\"\u003e\u003cimg alt=\"SP Performance Rotor Installation Instructions - Page 2\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/SP_Performance_Installation_2.jpg?v=1617830774\"\u003e[\/instruction][warranty]\u003ch3\u003eSP Performance Limited Lifetime Warranty\u003c\/h3\u003e\u003cp\u003eSP Performance rotors are warranted to be free of defects in workmanship, and are guaranteed not to crack for the life of the rotor*.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e*The life of the rotor is measured by the minimal thickness. Warranty does not apply to worn out rotors.\u003c\/strong\u003e\u003c\/p\u003e\u003ch4\u003eWarranty does NOT cover the following:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBrake noise or squealing.\u003c\/li\u003e\n\u003cli\u003eRotors worn to minimum thickness.\u003c\/li\u003e\n\u003cli\u003ePulsation caused by other factors such as a faulty caliper, worn out hardware, or excessive brake pad material transfer.\u003c\/li\u003e\n\u003cli\u003eDamage caused by excessive overheating (bluing) of the rotors.\u003c\/li\u003e\n\u003cli\u003eOff-road, commercial, or racing applications.\u003c\/li\u003e\n\u003cli\u003eImproper installation, modification, or product abuse.\u003c\/li\u003e\n\u003cli\u003eShipping charges.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003ch4\u003eTerms and conditions of the warranty:\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eThe warranty must be filed within 30 days of purchase.\u003c\/strong\u003e Save your original receipt. If you have a warranty claim, call us for return authorization. No returns will be accepted without an authorization number on the outside of the box. The original receipt of purchase must be included with the return. This warranty applies to the original purchaser only, and that the product was installed in accordance with the manufacturers recommendations. This warranty does not apply to commercial vehicles or vehicles used in racing.\u003c\/p\u003e\u003cp\u003eSP Performance will not pay for any labor or consequential damages or materials which may be necessary for replacement of its products. The warranty is limited to the exchange of the product only, and only after the manufacturers inspection of the defect. No other warranty is hereby given or implied. SP Performance does not accept or assume any liability from damages resulting from errors, changes, or improper installation of its products.\u003c\/p\u003e\u003ch4\u003eTo register this warranty, here is all you have to do:\u003c\/h4\u003e\u003cp\u003eFill out the warranty registration online at \u003ca href=\"https:\/\/www.sp-performance.com\/\"\u003ewww.sp-performance.com\u003c\/a\u003e within 30 days of purchase. Save your original receipt. If you have a warranty claim, call us for a return authorization. No returns will be accepted without having the authorization number on the outside of the box. The original receipt of the purchase must be included with the claim.\u003c\/p\u003e\u003ch4\u003eTo file a claim:\u003c\/h4\u003e\u003cp\u003ePlease call for a return authorization. Original receipt and warranty registration number will be required for the authorization.\u003c\/p\u003e\u003ch4\u003eAdditional information if applicable:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eA detailed description of the problem.\u003c\/li\u003e\n\u003cli\u003eHigh quality digital photos.\u003c\/li\u003e\n\u003cli\u003eRunout specifications.\u003c\/li\u003e\n\u003cli\u003eVehicle mileage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003ch4\u003eIf a claim is filed:\u003c\/h4\u003e\r\n\u003cp\u003eThe product has to be returned to SP Performance for inspection at the customers expense (shipping is not covered under warranty). The product is inspected for claimed defect, and if the condition of the product is deemed defective, a replacement of the product will be shipped at no charge less shipping. If the condition of the product is determined to be acceptable, no replacement will be given. No packages will be accepted without the authorization number on the box.\u003c\/p\u003e[\/warranty]","brand":"SP Performance","offers":[{"title":"Standard ZRC Finish","offer_id":41041470881984,"sku":"SPPD54-030","price":275.62,"currency_code":"USD","in_stock":true},{"title":"Black ZRC Finish","offer_id":41041470914752,"sku":"SPPD54-030-B","price":275.62,"currency_code":"USD","in_stock":true},{"title":"Silver ZRC Finish","offer_id":41041470947520,"sku":"SPPD54-030-P","price":275.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/products\/SP_Diamond_Slotted_Rotors_1_600x600_121c058d-53e3-4cbd-81c4-5c6aaaa6cb20.jpg?v=1634756747"},{"product_id":"sp-performance-f54-030-brake-rotors-front","title":"SP Performance Drilled and Slotted Brake Rotors - Front","description":"\u003cdiv\u003e\n\u003ch2\u003eSP Performance Drilled and Slotted Brake Rotors\u003c\/h2\u003e\n\u003cp\u003eSP Performance drilled and slotted rotors give the advantages of both drilled holes for cooling and slots to expel gasses and brake dust. SP Performance Rotors use only the finest materials from very select factories and drilled and slotted brake rotors come with your choice of coating for rust prevention. The anti-corrosion coating is available in three colors; Gray ZRC, Silver ZRC, and Black ZRC.\u003c\/p\u003e\n\u003cp\u003eSP Cross Drilled and Slotted Rotors are at the top of the list for performance rotors. By eliminating the sharp edges on our Cross Drilled holes, it greatly reduces the chance of cracking by moving the air and brake dust from the disc brake surface while reducing the surface temperature. By keeping the surface temperature down, this nearly eliminates heat checking and warping. All SP Performance Rotors are manufactured to OEM specifications, machine balanced and coated with your choice or ZRC color.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufactured in the USA\u003c\/strong\u003e - All rotors are machined and plated to order by SP Performance employees.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\n\u003ch2\u003eSP Drilled and Slotted Brake Rotor Characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross Drilled Holes\u003c\/strong\u003e - Holes are machined with our exclusive sinusoid curve chamfer, which promotes cooling and minimizes stress. They maximize air circulation, and with absolutely no sharp edge, our \"chamfer\" reduces the possibility of heat checking and increases both rotor and pad life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirectional Curved Slots\u003c\/strong\u003e - Slots helps increase pad bite, improves air circulation and cooling. The slots also help vent gasses, reduce brake fade and stop brake hydroplaning in wet weather reducing stopping distances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion Resistant Finish\u003c\/strong\u003e - Corrosion resistant finishes give a stunning clean look behind your wheels while preventing rust, corrosion and oxidation. Available in a Gray ZRC, Silver ZRC, or Black ZRC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuality\u003c\/strong\u003e - Our slotted and drilled discs are made using the finest quality castings that exceed OEM specifications. Designed with the use of CAD software and produced on CNC machines insures the highest quality and consistent performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\n\u003ch2\u003eSP Performance Sinusoidal Curved Chamfered Hole\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/SP_Chamfer.jpg?v=1618441172\" alt=\"SP Performance Rotor Sinusoidal Chamfer\"\u003e\u003c\/p\u003e\n\u003cp\u003eAfter many years of development we have come up with a drilling and chamfering method that absolutely has no sharp edges. Our brake discs are drilled with our exclusive sinusoid curved chamfer. The chamfer promotes cooling, minimizes stress, vents moisture and dust while minimizing heat checking and cracking. The smooth design also increases both rotor and pad life.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\n\u003ch2\u003eHow Drilled and Slotted Brake Rotors Work\u003c\/h2\u003e\n\u003cp\u003eSP Performance Cross Drilled and Slotted Brake Rotors have both functional holes and slots to provide the best cooling to the braking system. The combined forces of the brake pad rubbing against the brake rotor surface creates gasses and extensive heat which can cause brake fade, which in result, reduces stopping power. The combination of the holes and the slots is a force to be reckoned with. The holes in the brake rotor surface provide optimum cooling, while the slots keep the brake rotor surface clean providing a premium brake pad to brake rotor contact. The holes and slots on the face of the rotor will also help to eliminate hydroplaning by removing the water away from the braking surfaces when you hit a puddle, keeping you and your family safe.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv id=\"prop65\"\u003e\r\n\u003ch3\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/prop65_10pt.png?v=1611080686\" alt=\"Warning Prop 65\"\u003e WARNING\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e[instruction]\u003ch3\u003eSP Performance Rotor Installation Procedure\u003c\/h3\u003e\u003cimg alt=\"SP Performance Rotor Installation Instructions - Page 1\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/SP_Performance_Installation_1.jpg?v=1617830774\"\u003e\u003cimg alt=\"SP Performance Rotor Installation Instructions - Page 2\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/SP_Performance_Installation_2.jpg?v=1617830774\"\u003e[\/instruction][warranty]\u003ch3\u003eSP Performance Limited Lifetime Warranty\u003c\/h3\u003e\u003cp\u003eSP Performance rotors are warranted to be free of defects in workmanship, and are guaranteed not to crack for the life of the rotor*.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e*The life of the rotor is measured by the minimal thickness. Warranty does not apply to worn out rotors.\u003c\/strong\u003e\u003c\/p\u003e\u003ch4\u003eWarranty does NOT cover the following:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBrake noise or squealing.\u003c\/li\u003e\n\u003cli\u003eRotors worn to minimum thickness.\u003c\/li\u003e\n\u003cli\u003ePulsation caused by other factors such as a faulty caliper, worn out hardware, or excessive brake pad material transfer.\u003c\/li\u003e\n\u003cli\u003eDamage caused by excessive overheating (bluing) of the rotors.\u003c\/li\u003e\n\u003cli\u003eOff-road, commercial, or racing applications.\u003c\/li\u003e\n\u003cli\u003eImproper installation, modification, or product abuse.\u003c\/li\u003e\n\u003cli\u003eShipping charges.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003ch4\u003eTerms and conditions of the warranty:\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eThe warranty must be filed within 30 days of purchase.\u003c\/strong\u003e Save your original receipt. If you have a warranty claim, call us for return authorization. No returns will be accepted without an authorization number on the outside of the box. The original receipt of purchase must be included with the return. This warranty applies to the original purchaser only, and that the product was installed in accordance with the manufacturers recommendations. This warranty does not apply to commercial vehicles or vehicles used in racing.\u003c\/p\u003e\u003cp\u003eSP Performance will not pay for any labor or consequential damages or materials which may be necessary for replacement of its products. The warranty is limited to the exchange of the product only, and only after the manufacturers inspection of the defect. No other warranty is hereby given or implied. SP Performance does not accept or assume any liability from damages resulting from errors, changes, or improper installation of its products.\u003c\/p\u003e\u003ch4\u003eTo register this warranty, here is all you have to do:\u003c\/h4\u003e\u003cp\u003eFill out the warranty registration online at \u003ca href=\"https:\/\/www.sp-performance.com\/\"\u003ewww.sp-performance.com\u003c\/a\u003e within 30 days of purchase. Save your original receipt. If you have a warranty claim, call us for a return authorization. No returns will be accepted without having the authorization number on the outside of the box. The original receipt of the purchase must be included with the claim.\u003c\/p\u003e\u003ch4\u003eTo file a claim:\u003c\/h4\u003e\u003cp\u003ePlease call for a return authorization. Original receipt and warranty registration number will be required for the authorization.\u003c\/p\u003e\u003ch4\u003eAdditional information if applicable:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eA detailed description of the problem.\u003c\/li\u003e\n\u003cli\u003eHigh quality digital photos.\u003c\/li\u003e\n\u003cli\u003eRunout specifications.\u003c\/li\u003e\n\u003cli\u003eVehicle mileage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003ch4\u003eIf a claim is filed:\u003c\/h4\u003e\r\n\u003cp\u003eThe product has to be returned to SP Performance for inspection at the customers expense (shipping is not covered under warranty). The product is inspected for claimed defect, and if the condition of the product is deemed defective, a replacement of the product will be shipped at no charge less shipping. If the condition of the product is determined to be acceptable, no replacement will be given. No packages will be accepted without the authorization number on the box.\u003c\/p\u003e[\/warranty]","brand":"SP Performance","offers":[{"title":"Standard ZRC Finish","offer_id":41041715822784,"sku":"SPPF54-030","price":268.42,"currency_code":"USD","in_stock":true},{"title":"Black ZRC Finish","offer_id":41041715855552,"sku":"SPPF54-030-B","price":268.42,"currency_code":"USD","in_stock":true},{"title":"Silver ZRC Finish","offer_id":41041715888320,"sku":"SPPF54-030-P","price":268.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/products\/SP_Drilled_Slotted_Rotors_1_600x600_b1cf310c-9b8c-4dd4-9314-1824ca8c45e1.jpg?v=1634759794"},{"product_id":"sp-performance-s54-030-brake-rotors-front","title":"SP Performance Double Drilled and Slotted Brake Rotors - Front","description":"\u003cdiv\u003e\n\u003ch2\u003eSP Performance Double Drilled and Slotted Brake Rotors\u003c\/h2\u003e\r\n\u003cp\u003eSP Performance drilled and slotted rotors give the advantages of both drilled holes for cooling and slots to expel gasses and brake dust. SP Performance Rotors use only the finest materials from very select factories and drilled and slotted brake rotors come with your choice of coating for rust prevention. The anti-corrosion coating is available in three colors; Gray ZRC, Silver ZRC, and Black ZRC.\u003c\/p\u003e\n\u003cp\u003eSP Cross Drilled and Slotted Rotors are at the top of the list for performance rotors. By eliminating the sharp edges on our Cross Drilled holes, it greatly reduces the chance of cracking by moving the air and brake dust from the disc brake surface while reducing the surface temperature. By keeping the surface temperature down, this nearly eliminates heat checking and warping. All SP Performance Rotors are manufactured to OEM specifications, machine balanced and coated with your choice or ZRC color.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufactured in the USA\u003c\/strong\u003e - All rotors are machined and plated to order by SP Performance employees.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\n\u003ch2\u003eSP Double Drilled and Slotted Brake Rotor Characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross Drilled Holes\u003c\/strong\u003e - Holes are machined with our exclusive sinusoid curve chamfer, which promotes cooling and minimizes stress. They maximize air circulation, and with absolutely no sharp edge, our \"chamfer\" reduces the possibility of heat checking and increases both rotor and pad life\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirectional Curved Slots\u003c\/strong\u003e - Slots helps increase pad bite, improves air circulation and cooling. The slots also help vent gasses, reduce brake fade and stop brake hydroplaning in wet weather reducing stopping distances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion Resistant Finish\u003c\/strong\u003e - Corrosion resistant finishes give a stunning clean look behind your wheels while preventing rust, corrosion and oxidation. Available in a Gray ZRC, Silver ZRC, or Black ZRC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuality\u003c\/strong\u003e - Our slotted and drilled discs are made using the finest quality castings that exceed OEM specifications. Designed with the use of CAD software and produced on CNC machines insures the highest quality and consistent performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\n\u003ch2\u003eSP Performance Sinusoidal Curved Chamfered Hole\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/SP_Chamfer.jpg?v=1618441172\" alt=\"SP Performance Rotor Sinusoidal Chamfer\"\u003e\u003c\/p\u003e\r\n\u003cp\u003eAfter many years of development we have come up with a drilling and chamfering method that absolutely has no sharp edges. Our brake discs are drilled with our exclusive sinusoid curved chamfer. The chamfer promotes cooling, minimizes stress, vents moisture and dust while minimizing heat checking and cracking. The smooth design also increases both rotor and pad life.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\n\u003ch2\u003eHow Drilled and Slotted Brake Rotors Work\u003c\/h2\u003e\n\u003cp\u003eSP Performance Cross Drilled and Slotted Brake Rotors have both functional holes and slots to provide the best cooling to the braking system. The combined forces of the brake pad rubbing against the brake rotor surface creates gasses and extensive heat which can cause brake fade, which in result, reduces stopping power. The combination of the holes and the slots is a force to be reckoned with. The holes in the brake rotor surface provide optimum cooling, while the slots keep the brake rotor surface clean providing a premium brake pad to brake rotor contact. The holes and slots on the face of the rotor will also help to eliminate hydroplaning by removing the water away from the braking surfaces when you hit a puddle, keeping you and your family safe.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv id=\"prop65\"\u003e\n\u003ch3\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/prop65_10pt.png?v=1611080686\" alt=\"Warning Prop 65\"\u003e WARNING\u003c\/h3\u003e\r\n\u003cp\u003eThis product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\r\n[instruction]\u003ch3\u003eSP Performance Rotor Installation Procedure\u003c\/h3\u003e\u003cimg alt=\"SP Performance Rotor Installation Instructions - Page 1\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/SP_Performance_Installation_1.jpg?v=1617830774\"\u003e\u003cimg alt=\"SP Performance Rotor Installation Instructions - Page 2\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/SP_Performance_Installation_2.jpg?v=1617830774\"\u003e[\/instruction][warranty]\u003ch3\u003eSP Performance Limited Lifetime Warranty\u003c\/h3\u003e\u003cp\u003eSP Performance rotors are warranted to be free of defects in workmanship, and are guaranteed not to crack for the life of the rotor*.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e*The life of the rotor is measured by the minimal thickness. Warranty does not apply to worn out rotors.\u003c\/strong\u003e\u003c\/p\u003e\u003ch4\u003eWarranty does NOT cover the following:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBrake noise or squealing.\u003c\/li\u003e\n\u003cli\u003eRotors worn to minimum thickness.\u003c\/li\u003e\n\u003cli\u003ePulsation caused by other factors such as a faulty caliper, worn out hardware, or excessive brake pad material transfer.\u003c\/li\u003e\n\u003cli\u003eDamage caused by excessive overheating (bluing) of the rotors.\u003c\/li\u003e\n\u003cli\u003eOff-road, commercial, or racing applications.\u003c\/li\u003e\n\u003cli\u003eImproper installation, modification, or product abuse.\u003c\/li\u003e\n\u003cli\u003eShipping charges.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003ch4\u003eTerms and conditions of the warranty:\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eThe warranty must be filed within 30 days of purchase.\u003c\/strong\u003e Save your original receipt. If you have a warranty claim, call us for return authorization. No returns will be accepted without an authorization number on the outside of the box. The original receipt of purchase must be included with the return. This warranty applies to the original purchaser only, and that the product was installed in accordance with the manufacturers recommendations. This warranty does not apply to commercial vehicles or vehicles used in racing.\u003c\/p\u003e\u003cp\u003eSP Performance will not pay for any labor or consequential damages or materials which may be necessary for replacement of its products. The warranty is limited to the exchange of the product only, and only after the manufacturers inspection of the defect. No other warranty is hereby given or implied. SP Performance does not accept or assume any liability from damages resulting from errors, changes, or improper installation of its products.\u003c\/p\u003e\u003ch4\u003eTo register this warranty, here is all you have to do:\u003c\/h4\u003e\u003cp\u003eFill out the warranty registration online at \u003ca href=\"https:\/\/www.sp-performance.com\/\"\u003ewww.sp-performance.com\u003c\/a\u003e within 30 days of purchase. Save your original receipt. If you have a warranty claim, call us for a return authorization. No returns will be accepted without having the authorization number on the outside of the box. The original receipt of the purchase must be included with the claim.\u003c\/p\u003e\u003ch4\u003eTo file a claim:\u003c\/h4\u003e\u003cp\u003ePlease call for a return authorization. Original receipt and warranty registration number will be required for the authorization.\u003c\/p\u003e\u003ch4\u003eAdditional information if applicable:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eA detailed description of the problem.\u003c\/li\u003e\n\u003cli\u003eHigh quality digital photos.\u003c\/li\u003e\n\u003cli\u003eRunout specifications.\u003c\/li\u003e\n\u003cli\u003eVehicle mileage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003ch4\u003eIf a claim is filed:\u003c\/h4\u003e\r\n\u003cp\u003eThe product has to be returned to SP Performance for inspection at the customers expense (shipping is not covered under warranty). The product is inspected for claimed defect, and if the condition of the product is deemed defective, a replacement of the product will be shipped at no charge less shipping. If the condition of the product is determined to be acceptable, no replacement will be given. No packages will be accepted without the authorization number on the box.\u003c\/p\u003e[\/warranty]","brand":"SP Performance","offers":[{"title":"Standard ZRC Finish","offer_id":41042399658176,"sku":"SPPS54-030","price":281.9,"currency_code":"USD","in_stock":true},{"title":"Black ZRC Finish","offer_id":41042399690944,"sku":"SPPS54-030-B","price":281.9,"currency_code":"USD","in_stock":true},{"title":"Silver ZRC Finish","offer_id":41042399723712,"sku":"SPPS54-030-P","price":281.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/products\/SP_Double_Drilled_Slotted_Rotors_Grey_14e4ab87-df62-4ce9-a232-fc03e7e4208f.jpg?v=1634771794"},{"product_id":"sp-performance-t54-030-brake-rotors-front","title":"SP Performance Slotted Brake Rotors - Front","description":"\u003cdiv\u003e\n\u003ch2\u003eSP Performance Slotted Brake Rotors\u003c\/h2\u003e\n\u003cp\u003eSP Performance slotted brake rotors provide excellent stopping power while looking great. The slots on the brake rotor surface expel the brake dust away from your braking surface and wheels. This keeps the braking surface cooler. All SP Performance Brake rotors are machine balanced and disc ground and meet or exceed OEM specification. The slotted brake rotors are direct replacements to your existing brake rotors and require no brake system modifications. All slotted brake rotors come with your choice of coating for rust prevention. The anti-corrosion coating is available in three colors; Gray ZRC, Silver ZRC, and Black ZRC.\u003c\/p\u003e\n\u003cp\u003eSlotted rotors are the preferred pattern for track cars as there is no risk of cracking due to heavy braking. The slots on the rotor is also one of the best ways to combat brake fade and maintain consistent stopping power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufactured in the USA\u003c\/strong\u003e - All rotors are machined and plated to order by SP Performance employees.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\n\u003ch2\u003eOur Review\u003c\/h2\u003e\n\u003cp\u003eThe slotted only version of SP Performance rotors are the most durable version. They will hold up very well to heavy vehicles and high heat situations. If you have a heavy vehicle (3\/4 or 1 ton) or are notoriously hard on rotors, these are a great choice.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\n\u003ch2\u003eSP Slotted Brake Rotor Characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirectional Angles Slots\u003c\/strong\u003e - The directional slots help increase pad bite, improve air circulation, and increase cooling. The slots also reduce fade and stop brake hydroplaning in bad weather. This greatly improving braking efficiency and reduces stopping distance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirectional Mini Half Slot\u003c\/strong\u003e - Mini Slots help to balance and stabilize friction level as well as optimizing pad contact. They also give the rotor a unique look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion Resistant Finish\u003c\/strong\u003e - Anti-Corrosion finishes give you a stunning clean look behind your wheels while preventing rust, corrosion, and oxidation. Available in Silver ZRC, Gray ZRC, or Black ZRC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuality\u003c\/strong\u003e - SP Performance slotted rotors are made using the finest quality castings that exceed OEM specifications. They are designed with the use of CAD software and machined with CNC equipment, ensuring the highest quality and consistent performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\n\u003ch2\u003eHow Slotted Brake Rotors Work\u003c\/h2\u003e\n\u003cp\u003eSlotted brake rotors are used to move unwanted material and gasses away from the brake rotor and brake pad surfaces. Gasses are created by the repeated use of heavy braking, which causes a layer of brake dust and gasses to build up between the brake pad surface and the brake rotor surface. This will push the the brake pad away from the rotor surface. By adding slots to the surfaces of the brake rotor, those gasses are allowed to escape. This will creates a solid bite between the brake pad to brake rotor. As the gasses escape, the brake rotor and pad surface stay cooler, helping to eliminate brake fade.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv id=\"prop65\"\u003e\n\u003ch3\u003e\n\u003cimg alt=\"Warning Prop 65\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/prop65_10pt.png?v=1611080686\"\u003e WARNING\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e[instruction]\u003ch3\u003eSP Performance Rotor Installation Procedure\u003c\/h3\u003e\u003cimg alt=\"SP Performance Rotor Installation Instructions - Page 1\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/SP_Performance_Installation_1.jpg?v=1617830774\"\u003e\u003cimg alt=\"SP Performance Rotor Installation Instructions - Page 2\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/SP_Performance_Installation_2.jpg?v=1617830774\"\u003e[\/instruction][warranty]\u003ch3\u003eSP Performance Limited Lifetime Warranty\u003c\/h3\u003e\u003cp\u003eSP Performance rotors are warranted to be free of defects in workmanship, and are guaranteed not to crack for the life of the rotor*.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e*The life of the rotor is measured by the minimal thickness. Warranty does not apply to worn out rotors.\u003c\/strong\u003e\u003c\/p\u003e\u003ch4\u003eWarranty does NOT cover the following:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBrake noise or squealing.\u003c\/li\u003e\n\u003cli\u003eRotors worn to minimum thickness.\u003c\/li\u003e\n\u003cli\u003ePulsation caused by other factors such as a faulty caliper, worn out hardware, or excessive brake pad material transfer.\u003c\/li\u003e\n\u003cli\u003eDamage caused by excessive overheating (bluing) of the rotors.\u003c\/li\u003e\n\u003cli\u003eOff-road, commercial, or racing applications.\u003c\/li\u003e\n\u003cli\u003eImproper installation, modification, or product abuse.\u003c\/li\u003e\n\u003cli\u003eShipping charges.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003ch4\u003eTerms and conditions of the warranty:\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eThe warranty must be filed within 30 days of purchase.\u003c\/strong\u003e Save your original receipt. If you have a warranty claim, call us for return authorization. No returns will be accepted without an authorization number on the outside of the box. The original receipt of purchase must be included with the return. This warranty applies to the original purchaser only, and that the product was installed in accordance with the manufacturers recommendations. This warranty does not apply to commercial vehicles or vehicles used in racing.\u003c\/p\u003e\u003cp\u003eSP Performance will not pay for any labor or consequential damages or materials which may be necessary for replacement of its products. The warranty is limited to the exchange of the product only, and only after the manufacturers inspection of the defect. No other warranty is hereby given or implied. SP Performance does not accept or assume any liability from damages resulting from errors, changes, or improper installation of its products.\u003c\/p\u003e\u003ch4\u003eTo register this warranty, here is all you have to do:\u003c\/h4\u003e\u003cp\u003eFill out the warranty registration online at \u003ca href=\"https:\/\/www.sp-performance.com\/\"\u003ewww.sp-performance.com\u003c\/a\u003e within 30 days of purchase. Save your original receipt. If you have a warranty claim, call us for a return authorization. No returns will be accepted without having the authorization number on the outside of the box. The original receipt of the purchase must be included with the claim.\u003c\/p\u003e\u003ch4\u003eTo file a claim:\u003c\/h4\u003e\u003cp\u003ePlease call for a return authorization. Original receipt and warranty registration number will be required for the authorization.\u003c\/p\u003e\u003ch4\u003eAdditional information if applicable:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eA detailed description of the problem.\u003c\/li\u003e\n\u003cli\u003eHigh quality digital photos.\u003c\/li\u003e\n\u003cli\u003eRunout specifications.\u003c\/li\u003e\n\u003cli\u003eVehicle mileage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003ch4\u003eIf a claim is filed:\u003c\/h4\u003e\r\n\u003cp\u003eThe product has to be returned to SP Performance for inspection at the customers expense (shipping is not covered under warranty). The product is inspected for claimed defect, and if the condition of the product is deemed defective, a replacement of the product will be shipped at no charge less shipping. If the condition of the product is determined to be acceptable, no replacement will be given. No packages will be accepted without the authorization number on the box.\u003c\/p\u003e[\/warranty]","brand":"SP Performance","offers":[{"title":"Standard ZRC Finish","offer_id":41042716131520,"sku":"SPPT54-030","price":249.73,"currency_code":"USD","in_stock":true},{"title":"Black ZRC Finish","offer_id":41042716164288,"sku":"SPPT54-030-B","price":249.73,"currency_code":"USD","in_stock":true},{"title":"Silver ZRC Finish","offer_id":41042716197056,"sku":"SPPT54-030-P","price":249.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/products\/SP_Performance_T_Gray_1820ce09-3a94-4c64-b4ba-d9dbbca930da.jpg?v=1634775930"},{"product_id":"sp-performance-v54-030-brake-rotors-front","title":"SP Performance Peak Series Slotted Brake Rotors - Front","description":"\u003cdiv\u003e\n\u003ch2\u003eSP Performance Peak Series Slotted Brake Rotors\u003c\/h2\u003e\n\u003cp\u003eSP Performance slotted brake rotors provide excellent stopping power while looking great. The slots on the brake rotor surface expel the brake dust away from your braking surface and wheels. This keeps the braking surface cooler. All SP Performance Brake rotors are machine balanced and disc ground and meet or exceed OEM specification. The slotted brake rotors are direct replacements to your existing brake rotors and require no brake system modifications. All slotted brake rotors come with your choice of coating for rust prevention. The anti-corrosion coating is available in three colors; Gray ZRC, Silver ZRC, and Black ZRC.\u003c\/p\u003e\n\u003cp\u003eSlotted rotors are the preferred pattern for track cars as there is no risk of cracking due to heavy braking. The slots on the rotor is also one of the best ways to combat brake fade and maintain consistent stopping power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufactured in the USA\u003c\/strong\u003e - All rotors are machined and plated to order by SP Performance employees.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\n\u003ch2\u003eOur Review\u003c\/h2\u003e\n\u003cp\u003eThe slotted only version of SP Performance rotors are the most durable version. They will hold up very well to heavy vehicles and high heat situations. If you have a heavy vehicle (3\/4 or 1 ton) or are notoriously hard on rotors, these are a great choice.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\n\u003ch2\u003eSP Slotted Peak Series Brake Rotor Characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngles Slots\u003c\/strong\u003e - The angle slots help increase pad bite, improve air circulation, and increase cooling. The slots also reduce fade and stop brake hydroplaning in bad weather. This greatly improving braking efficiency and reduces stopping distance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMini Half Slot\u003c\/strong\u003e - Mini Slots help to balance and stabilize friction level as well as optimizing pad contact. They also give the rotor a unique look\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion Resistant Finish\u003c\/strong\u003e - Anti-Corrosion finishes give you a stunning clean look behind your wheels while preventing rust, corrosion, and oxidation. Available in Silver ZRC, Gray ZRC, or Black ZRC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuality\u003c\/strong\u003e - SP Performance slotted rotors are made using the finest quality castings that exceed OEM specifications. They are designed with the use of CAD software and machined with CNC equipment, ensuring the highest quality and consistent performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\n\u003ch2\u003eHow Slotted Brake Rotors Work\u003c\/h2\u003e\n\u003cp\u003eSlotted brake rotors are used to move unwanted material and gasses away from the brake rotor and brake pad surfaces. Gasses are created by the repeated use of heavy braking, which causes a layer of brake dust and gasses to build up between the brake pad surface and the brake rotor surface. This will push the the brake pad away from the rotor surface. By adding slots to the surfaces of the brake rotor, those gasses are allowed to escape. This will creates a solid bite between the brake pad to brake rotor. As the gasses escape, the brake rotor and pad surface stay cooler, helping to eliminate brake fade.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv id=\"prop65\"\u003e\n\u003ch3\u003e\n\u003cimg alt=\"Warning Prop 65\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/prop65_10pt.png?v=1611080686\"\u003e WARNING\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e[instruction]\u003ch3\u003eSP Performance Rotor Installation Procedure\u003c\/h3\u003e\u003cimg alt=\"SP Performance Rotor Installation Instructions - Page 1\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/SP_Performance_Installation_1.jpg?v=1617830774\"\u003e\u003cimg alt=\"SP Performance Rotor Installation Instructions - Page 2\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/SP_Performance_Installation_2.jpg?v=1617830774\"\u003e[\/instruction][warranty]\u003ch3\u003eSP Performance Limited Lifetime Warranty\u003c\/h3\u003e\u003cp\u003eSP Performance rotors are warranted to be free of defects in workmanship, and are guaranteed not to crack for the life of the rotor*.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e*The life of the rotor is measured by the minimal thickness. Warranty does not apply to worn out rotors.\u003c\/strong\u003e\u003c\/p\u003e\u003ch4\u003eWarranty does NOT cover the following:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBrake noise or squealing.\u003c\/li\u003e\n\u003cli\u003eRotors worn to minimum thickness.\u003c\/li\u003e\n\u003cli\u003ePulsation caused by other factors such as a faulty caliper, worn out hardware, or excessive brake pad material transfer.\u003c\/li\u003e\n\u003cli\u003eDamage caused by excessive overheating (bluing) of the rotors.\u003c\/li\u003e\n\u003cli\u003eOff-road, commercial, or racing applications.\u003c\/li\u003e\n\u003cli\u003eImproper installation, modification, or product abuse.\u003c\/li\u003e\n\u003cli\u003eShipping charges.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003ch4\u003eTerms and conditions of the warranty:\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eThe warranty must be filed within 30 days of purchase.\u003c\/strong\u003e Save your original receipt. If you have a warranty claim, call us for return authorization. No returns will be accepted without an authorization number on the outside of the box. The original receipt of purchase must be included with the return. This warranty applies to the original purchaser only, and that the product was installed in accordance with the manufacturers recommendations. This warranty does not apply to commercial vehicles or vehicles used in racing.\u003c\/p\u003e\u003cp\u003eSP Performance will not pay for any labor or consequential damages or materials which may be necessary for replacement of its products. The warranty is limited to the exchange of the product only, and only after the manufacturers inspection of the defect. No other warranty is hereby given or implied. SP Performance does not accept or assume any liability from damages resulting from errors, changes, or improper installation of its products.\u003c\/p\u003e\u003ch4\u003eTo register this warranty, here is all you have to do:\u003c\/h4\u003e\u003cp\u003eFill out the warranty registration online at \u003ca href=\"https:\/\/www.sp-performance.com\/\"\u003ewww.sp-performance.com\u003c\/a\u003e within 30 days of purchase. Save your original receipt. If you have a warranty claim, call us for a return authorization. No returns will be accepted without having the authorization number on the outside of the box. The original receipt of the purchase must be included with the claim.\u003c\/p\u003e\u003ch4\u003eTo file a claim:\u003c\/h4\u003e\u003cp\u003ePlease call for a return authorization. Original receipt and warranty registration number will be required for the authorization.\u003c\/p\u003e\u003ch4\u003eAdditional information if applicable:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eA detailed description of the problem.\u003c\/li\u003e\n\u003cli\u003eHigh quality digital photos.\u003c\/li\u003e\n\u003cli\u003eRunout specifications.\u003c\/li\u003e\n\u003cli\u003eVehicle mileage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003ch4\u003eIf a claim is filed:\u003c\/h4\u003e\r\n\u003cp\u003eThe product has to be returned to SP Performance for inspection at the customers expense (shipping is not covered under warranty). The product is inspected for claimed defect, and if the condition of the product is deemed defective, a replacement of the product will be shipped at no charge less shipping. If the condition of the product is determined to be acceptable, no replacement will be given. No packages will be accepted without the authorization number on the box.\u003c\/p\u003e[\/warranty]","brand":"SP Performance","offers":[{"title":"Standard ZRC Finish","offer_id":41043025428672,"sku":"SPPV54-030","price":272.87,"currency_code":"USD","in_stock":true},{"title":"Black ZRC Finish","offer_id":41043025461440,"sku":"SPPV54-030-B","price":272.87,"currency_code":"USD","in_stock":true},{"title":"Silver ZRC Finish","offer_id":41043025494208,"sku":"SPPV54-030-P","price":272.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/products\/SP_Performance_V_Gray_db476b00-b077-4d0d-89ab-b7fadf0fffed.jpg?v=1634779380"}],"url":"https:\/\/www.hawkpadsdirect.com\/en-ca\/collections\/hawk-performance-brakes-for-2004-ford-taurus-w-rear-drum-brakes.oembed","provider":"Hawk Pads Direct","version":"1.0","type":"link"}