Hawk Performance LTS

We understand that traditional car brake pad technology just doesn't cut it on today's trucks. This is especially true for heavily loaded trucks and vehicles used in moderate towing. Our LTS (Light Truck and SUV) compound dramatically improves your vehicle's stopping power and fade resistance. It will also outlasts the competition in terms of rotor and pad wear. Ideal for a broad range of import and domestic vehicles, the LTS compound provides superior stopping power and longer pad life without excessive noise and dust. Engineered by truck brake pad experts, the Ferro-Carbon friction material of LTS is the optimal pad choice for light duty trucks, all classes of SUVs, and vans up to 1 ton. Expect 20-40% more stopping power over stock replacement pads.

Expert Opinion

The Hawk LTS is a good choice for light trucks and SUVs when your primary goal is to increase stopping power rather than minimize brake dust. The LTS compound is relatively clean but will generate some brake dust when compared to the Hawk Ceramic. The performance of the LTS will be better than the Hawk Ceramic and HPS, but not as good as the SuperDuty. If towing often, I would suggest the Hawk SuperDuty rather than the LTS, as the SuperDuty compound has a substantially higher temperature range to deal with high temperatures created while towing. If not towing often, the LTS will be your best choice.

Hawk LTS Compound Characteristics:

Strong, Balanced Initial Bite, Hot or Cold
Excellent Resistance to Fate
Ferro-Carbon Friction
Low Dust
Excellent Pad and Rotor Life
100-700 Deg F Operating Temperature Range
100-700 Deg F Optimal Temperature Range

Compound Chart

WARNING

This product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

[instruction]

Hawk Brake Pad Installation Procedure

Install Brake pads properly. Be sure pads are securely positioned in the caliper.
Flush system with fresh brake fluid.
Check all hydraulic parts for excess wear and tear.
Check disc for proper thickness, parallelism, and lateral run-out.
Check disc for scoring or grooves over .012"" depth. If either applies, resurfacing or replacement is required.
If disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid
Inspect calipers for freedom of movement. Lubricate where necessary

Hawk Brake Pad Bedding Procedure - Street Compounds

Make 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.
Make an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.
DO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)
Allow 15 minutes or more for the brake system to cool down.
Your new Hawk pads are ready for use.

[/instruction][warranty]

Limited Lifetime Warranty

Carlisle Brake & Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and/or reimbursed with Hawk Performance branded products of equal or greater value.

* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.

Download Warranty Claim Form

[/warranty]

Hawk HB210Y.677 Brake Pads