{"product_id":"hawk-performance-hb105q-620-brake-pads","title":"Hawk HB105Q.620 Brake Pads","description":"\u003cdiv\u003e\n\u003ch2\u003eHawk Performance DTC-80\u003c\/h2\u003e\n\u003cp\u003eHawk Performance products have dominated motorsports for more than 25 years, and this revolutionary compound is taking that domination to a new level. Intended for the hardest braking circuits where the most demanding brake products are required, Hawk DTC-80 is a compound engineered for use on all circle track and road racing venues where a high torque, high temperature-resilient friction material is a must. With a formulated flat coefficient of friction at high temperature levels, DTC-80 provides consistent performance corner after corner. Track tested and proven effective, this formulation offers lower wear rates and higher torque values than other competitive materials on the market today. The end results are better car control, more confident brake zone feel, and stunningly predictable performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\n\u003ch2\u003eExpert Opinion\u003c\/h2\u003e\n\u003cp\u003eThe DTC-80 has a higher temperature and generates more brake torque than the DTC-70. If you have been over-heating the DTC-70 or it is not giving you the torque you need, give the DTC-80 a try.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\n\u003ch2\u003eHawk Performance DTC-80 Race Compound Characteristics:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Initial Bite\u003c\/li\u003e\r\n\u003cli\u003eHigh Torque\u003c\/li\u003e\n\u003cli\u003eConsistent Brake Torque over Temperature Range\u003c\/li\u003e\n\u003cli\u003eSuperior pad and Rotor Wear\u003c\/li\u003e\n\u003cli\u003eApplicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks\u003c\/li\u003e\n\u003cli\u003e500-1700 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e600-1500 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003ch2\u003eHawk Race Compound Chart\u003c\/h2\u003e\n\u003cdiv id=\"race-compound-chart\"\u003e\u003cimg alt=\"Hawk Performance Race Compound Chart\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/Hawk_Race_Compound_Chart.jpg?v=1616616296\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv id=\"race-compound-chart\"\u003e\u003cimg alt=\"Hawk Performance DTC-80 Characteristics\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/Hawk_DTC_80_Characteristics.jpg?v=1616691449\"\u003e\u003c\/div\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv id=\"prop65\"\u003e\n\u003ch3\u003e\n\u003cimg alt=\"Warning Prop 65\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/prop65_10pt.png?v=1611080686\"\u003e WARNING\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e[instruction]\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e\r\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\r\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\r\nli\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e\n\u003c\/ul\u003e[\/instruction][warranty]\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/HAWK_WARRENTY_RMA_FORM.pdf?v=1610998994\" target=\"_blank\"\u003eDownload Warranty Claim Form\u003c\/a\u003e\u003c\/p\u003e[\/warranty]\r\n","brand":"Hawk Performance","offers":[{"title":"Default Title","offer_id":41130724556992,"sku":"HWKHB105Q.620","price":452.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/products\/Hawk_DTC80_1000x1000_7aeb523e-7279-45f5-86ec-28f785b2278f.jpg?v=1643244187","url":"https:\/\/www.hawkpadsdirect.com\/products\/hawk-performance-hb105q-620-brake-pads","provider":"Hawk Pads Direct","version":"1.0","type":"link"}